P 50 Gun - "Ordinary" is an underused word in George Kellgren's work. The winner of 2019 is a successful engineer and designer
Golden Bullseye has been awarded as a pioneer, repeatedly performing outside the box thinking, from the Grendel P10 pistol to the current Kel-Tech bullpup pistols and rifles. Just when you think Kellgren and Kel-Tec have an idea, they pull something new out of the hat. A recent case concerns the Kel-Tec P50, a large semi-automatic pistol chambered in the 5.7x28mm FNNN cartridge that is anything but ordinary in both form and function. .
P 50 Gun
Shown here (l. to r): 9mm Luger, 5.7x28mm FN and 5.56 NATO cartridges. Note the weak 5.7 mm shoulder and short overall length.
Promag Ruger P Series 9mm (50) Rd Drum Black Polymer
Although the P50 is not similar to other recent Kel-Tec pistols, the pistol has its roots in earlier Kelgren designs and is primarily based around the .22 rimfire cartridge. In 1990, Kellgren Grendel, Inc. It introduced the P30, a semi-automatic pistol chambered in .22 WMR that uses a 30-round box magazine in the handle. This spawned a whole family of 30-round, 22 WMR rifles, including the R31 rifle, as well as a stockless short-barreled rifle. Known as the P31, it was designed to be carried and shot in a sling. In the year In 2011, Kel-Tech refined the P30 concept when it introduced the .22 WMR-chambered, 30-round PMR-30 handgun, followed by the CMR-30 carbine. This year, Kel-Tech expanded its high-velocity .22 game with the P50, which marketing director Derek Kellgren called "the most innovative pistol to date." Here is the reason.
In the year In 1990, the 5.7x28mm was introduced as a stock cartridge for the Fabrication National P90 defense weapon. It was created at the request of NATO to replace existing machine guns and submachine guns with 9mm NATO, armor-piercing, cartridge/gun combination capable of defeating light body armor. Eight years later, FN released the Five-Seven N, a semi-automatic pistol chambered for the cartridge. Although the FN began issuing the Five Seven N rifle to civilians in 2004, and the following year introduced a standalone 16-inch barrel P90 Carbine known as the PS90, it would be more than twenty years before that. The 5.7 mm cartridge turned out to be too. It's popular in the civilian market. It started when a few non-FN manufacturers started producing their own 5.7x28mm FN rifles, including CMMG, Diamondback and MasterPiece Arms, last year when the Ruger-57 rifle kicked the 5.7mm pistol market into a tailspin. accessories, new loads from Federal's American Eagle brand, as well as Speer's Gold Dot defense pistol line up in that area.
P50 is divided into four parts for cleaning and maintenance. A release mechanism is mounted on the back of the grip, which allows the receiver to be hung from the grip frame (inset) and the magazine inserted or removed.
At the heart of the P50 is not only the FN P90 cartridge, but also the company's 50-round top-loading magazine. This polymer magazine collects the cartridges in a double column based on the axis of the gun. A spiral food map rotates the circuits to match each other to feed into the room. Magazines can be manually loaded and illuminated without tools, so the user can monitor the remaining rounds. A 50-round magazine adds a pound to the total weight of the P50. Designed to make the FN P90 compact handheld, this magazine works the same way as the P50. The gun holds 50 rounds without the extra width or height required by a standard box or drum magazine of that capacity. In addition to FN, several aftermarket manufacturers make magazines for the P90, including Promag Industries, and two Promag magazines are offered in the P50. 30 issue magazines from FN for those living in areas with limited magazine delivery locations.
Tfb Gunfest] Looking Closer At The Keltec P50 The Firearm Blog
Like the FN P90, the P50 uses a bolt action, loading dual springs as the bolt rides on two guide rods. The machine is housed in a perforated aluminum receiver. The magazine sits on the back of the P90, and rounds are fed. Fire control units are housed in low polymer housings that use the same shape and design as other Kel-Tech guns.
The P50 has a slightly smaller profile and is 3 pounds, 8 ounces, empty, about 2 pounds, 8 ounces lighter than the FN P90. The front grip surface of the rifle's handguard (like a pistol, you can't hold it upright and remain NFA registered), followed by a 2.5 inch rail section. Picatinny for mounting lights, lasers and other accessories. Top end. The receiver has a 9 inch picatinny rail section. The train has a height-adjustable front pillar and a locked rear blade with adjustable openings for ventilation. The width of the openings is 13".
The Kel-Tec P50 has two quick sling loading points, one inside the rifle and one on the back of the receiver.
The P50 has two quick release points that actuate the sling, one in the pistol grip and one on the rear of the receiver, and the pistol is supplied with sling nylon and a swivel. Not only for carrying, the sling can be used as a shooting aid by pushing the tension to stabilize the gun. Unlike the single-point system, the points on the top and bottom of the gun are equal in tension for added stability, creating a very stable platform for hand-held shooting. Even without a sling, a fully loaded P50 balances well in a two-handed shooting hand.
Nra Gun Of The Week: Kel Tec P50
A set of metal sights are built into the Kel-Tech P50 optics rail, with a front post height adjustable (pictured, arrow) and a locked rear post adjustable for windage (r.).
To load the P50, a release lever is installed on the rear, which allows the receiver, which holds the barrel and action, to be stuck up. A loaded magazine is inserted into the action, and the receiver is closed (trigger action that closes the upper cover when loading a belt-supported gun). Holding the shot, the release lever rides like a beavertail on the hand web, preventing accidental catches. The P50 uses a T-shaped charging port that slides into the back of the receiver. It is possible to keep the P50 with the body and reach on the receiver for more rack than you can give a semi-automatic rifle with a slide. The safety center at the top of the handle on the right and left side offers lever designs for easy operation with the thumb, which integrates with the charging handle and provides an intuitive operation.
The barrel of the P50 is equipped with a 1/2x28 TPI muzzle, which allows the attachment of accessories such as the YHM Turbo K suppressor, and the gun comes with a thread protector (inset).
The P50's 9.60" barrel is almost up to FN's P90. .ps.) and 41 percent more muzzle energy (348 ft.-lbs. vs. 246ft.-lbs.) than the cartridge fired from the Ruger-57's 4.9" barrel we tested last year. The P50 barrel is threaded 1/2x28 TPI to accept a muzzle device or muffler, and the gun is supplied with a thread protector.
Keltec P50 Tactical Pistol: 50 Rounds Of 5.7x28mm Firepower For Sporting, Hunting And Home Defense Applications!
The Kel-Tec P50 uses the FN P90/PS90 magazine design, which is a 50-round box that mounts to the top of the rifle. However, in this case, the cartridges are fed higher in the room.
While most users use electronic optics on the P50, we chose to go with the Weaver Classic 2.5-8X Handgun. Not only did it add to the P50's hurricane blast vibe, but the bright optics helped us get the best accuracy out of the gun. Unlike most centerfire semi-automatic pistols, the barrel of the P50 is fixed to the receiver, and the scope is tightly fitted. Accuracy is aided by the P50s trigger. After the first intake, followed by a small cry, it is divided into 3 pounds, 8 ounces. The result of all of these factors was an average of 0.75" for five-shot groups firing from each other at 25 yards. Reliability was 100 percent from the first round, and the gun performed well with all the ammunition we used.
In contrast
Huawei p 50, sansui p 50, quickflash p 50, p 50 pro, piranha p 50, p 50 lotion, wimberley p 50, p 245 50 r20, p 50, s&p 50 etf, hais 50 p, biologique p 50
0 Comments